Reed, R. C. The Superalloys: Fundamentals and Applications (Cambridge Univ. Press, 2006). Mukherjee, T. et al. Control of grain structure, phases, and defects in additive manufacturing of high-performance metallic components. Prog. Mater. Sci. 138, 101153 (2023). Article CAS Google Scholar Litnovsky, A. et al. Optimization of single crystal mirrors for ITER diagnostics. Fusion Eng. Des.
Reed, R. C. The Superalloys: Fundamentals and Applications (Cambridge Univ. Press, 2006).
Mukherjee, T. et al. Control of grain structure, phases, and defects in additive manufacturing of high-performance metallic components. Prog. Mater. Sci. 138, 101153 (2023).
Google Scholar
Litnovsky, A. et al. Optimization of single crystal mirrors for ITER diagnostics. Fusion Eng. Des. 146, 1450–1453 (2019).
Google Scholar
Song, T. et al. Strong and ductile titanium–oxygen–iron alloys by additive manufacturing. Nature 618, 63–68 (2023).
Google Scholar
Zhu, Y. et al. Ultrastrong nanotwinned titanium alloys through additive manufacturing. Nat. Mater. 21, 1258–1262 (2022).
Google Scholar
Smith, T. M. et al. A 3D printable alloy designed for extreme environments. Nature 617, 513–518 (2023).
Google Scholar
Ren, J. et al. Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing. Nature 608, 62–68 (2022).
Google Scholar
Zhang, J. et al. Ultrauniform, strong, and ductile 3D-printed titanium alloy through bifunctional alloy design. Science 383, 639–645 (2024).
Google Scholar
DebRoy, T. et al. Additive manufacturing of metallic components – process, structure and properties. Prog. Mater. Sci. 92, 112–224 (2018).
Google Scholar
Gäumann, M., Bezencon, C., Canalis, P. & Kurz, W. Single-crystal laser deposition of superalloys: processing–microstructure maps. Acta Mater. 49, 1051–1062 (2001).
Google Scholar
Basak, A., Acharya, R. & Das, S. Epitaxial deposition of nickel-based superalloy René 142 through scanning laser epitaxy (SLE). Addit. Manuf. 22, 665–671 (2018).
Google Scholar
Körner, C. et al. Microstructure and mechanical properties of CMSX-4 single crystals prepared by additive manufacturing. Metall. Mater. Trans. A 49, 3781–3792 (2018).
Google Scholar
Beladi, H., Chao, Q. & Rohrer, G. S. Variant selection and intervariant crystallographic planes distribution in martensite in a Ti–6Al–4V alloy. Acta Mater. 80, 478–489 (2014).
Google Scholar
Qu, Z. et al. High fatigue resistance in a titanium alloy via near-void-free 3D printing. Nature 626, 999–1004 (2024).
Google Scholar
Zhang, D. et al. Additive manufacturing of ultrafine-grained high-strength titanium alloys. Nature 576, 91–95 (2019).
Google Scholar
Zhang, T. et al. In situ design of advanced titanium alloy with concentration modulations by additive manufacturing. Science 374, 478–482 (2021).
Google Scholar
Zhao, S. et al. Cryoforged nanotwinned titanium with ultrahigh strength and ductility. Science 373, 1363–1368 (2021).
Google Scholar
Todaro, C. J. et al. Grain structure control during metal 3D printing by high-intensity ultrasound. Nat. Commun. 11, 142 (2020).
Google Scholar
Chandra, S., Radhakrishnan, J., Huang, S., Wei, S. & Ramamurty, U. Solidification in metal additive manufacturing: challenges, solutions, and opportunities. Prog. Mater. Sci. 148, 101361 (2025).
Google Scholar
Müller, G. & Friedrich, J. in Encyclopedia of Condensed Matter Physics (eds Bassani, G. F., Liedl, G. L. & Wyder, P.) 262–274 (Elsevier, 2005).
Dhanaraj, G., Byrappa, K., Prasad, V. & Dudley, M. Springer Handbook of Crystal Growth (Springer, 2010).
Limmaneevichitr, C. & Kou, S. Experiments to simulate effect of Marangoni convection on weld pool shape. Weld. J. 79, 231S–237S (2000).
Lee, Y. & Farson, D. F. Simulation of transport phenomena and melt pool shape for multiple layer additive manufacturing. J. Laser. Appl. 28, 012006 (2016).
Google Scholar
Cayron, C., Artaud, B. & Briottet, L. Reconstruction of parent grains from EBSD data. Mater. Charact. 57, 386–401 (2006).
Google Scholar
Haxhimali, T., Karma, A., Gonzales, F. & Rappaz, M. Orientation selection in dendritic evolution. Nat. Mater. 5, 660–664 (2006).
Google Scholar
Fouad, D. M., Panwisawas, C., Ge, H., Chiu, Y.-L. & Attallah, M. M. Achieving the strength-ductility balance through the control of the prior β-grain size in laser beam powder bed fusion of Ti-6Al-4V. Addit. Manuf. 109, 104842 (2025).
Google Scholar
Cortez Alves de Oliveira, V. M. et al. Short-term creep properties of Ti-6Al-4V alloy subjected to surface plasma carburizing process. J. Mater. Res. Technol. 4, 359–366 (2015).
Google Scholar
Oliveira, V. M. C. A., Vazquez, A. M., Aguiar, C., Robin, A. & Barboza, M. J. R. Nitride coatings improve Ti-6Al-4V alloy behavior in creep tests. Mater. Sci. Eng. A 670, 357–368 (2016).
Google Scholar
Reis, A. G. D., Reis, D. A. P., de Moura Neto, C., Barboza, M. J. R. & Oñoro, J. Creep behavior and surface characterization of a laser surface nitrided Ti-6Al-4V alloy. Mater. Sci. Eng. A 577, 48–53 (2013).
Google Scholar
Barboza, M. J. R., Moura Neto, C. & Silva, C. R. M. Creep mechanisms and physical modeling for Ti–6Al–4V. Mater. Sci. Eng. A 369, 201–209 (2004).
Google Scholar
Spigarelli, S., Paoletti, C., Cabibbo, M., Cerri, E. & Santecchia, E. On the creep performance of the Ti-6Al-4V alloy processed by additive manufacturing. Addit. Manuf. 49, 102520 (2022).
Google Scholar
Fereiduni, E., Ghasemi, A. & Elbestawi, M. TiB reinforced Ti-6Al-4V matrix composites with improved short-term creep performance fabricated by laser powder bed fusion. J. Manuf. Process. 70, 593–607 (2021).
Google Scholar
Darling, K. et al. Extreme creep resistance in a microstructurally stable nanocrystalline alloy. Nature 537, 378–381 (2016).
Google Scholar
Lütjering, G. & Williams, J. C. Titanium 2nd edn (Springer, 2007).
Talignani, A. et al. A review on additive manufacturing of refractory tungsten and tungsten alloys. Addit. Manuf. 58, 103009 (2022).
Google Scholar
For more tech updates, stay tuned to our blog.
