Sanchez, C., Arribart, H. & Giraud Guille, M. M. Biomimetism and bioinspiration as tools for the design of innovative materials and systems. Nat. Mater. 4, 277–288 (2005). Article CAS PubMed Google Scholar Chen, J. et al. 3D-printed anisotropic polymer materials for functional applications. Adv. Mater. 34, 2102877 (2022). Article CAS Google Scholar Khuu, N., Kheiri,
Sanchez, C., Arribart, H. & Giraud Guille, M. M. Biomimetism and bioinspiration as tools for the design of innovative materials and systems. Nat. Mater. 4, 277–288 (2005).
Google Scholar
Chen, J. et al. 3D-printed anisotropic polymer materials for functional applications. Adv. Mater. 34, 2102877 (2022).
Google Scholar
Khuu, N., Kheiri, S. & Kumacheva, E. Structurally anisotropic hydrogels for tissue engineering. Trends Chem. 3, 1002–1026 (2021).
Google Scholar
Zhao, G. et al. Hydrogel-assisted microfluidic spinning of stretchable fibers via fluidic and interfacial self-adaptations. Sci. Adv. 9, eadj5407 (2023).
Google Scholar
Wang, X. et al. Stretch-induced conductivity enhancement in highly conductive and tough hydrogels. Adv. Mater. 36, e2313845 (2024).
Google Scholar
Ryma, M. et al. Translation of collagen ultrastructure to biomaterial fabrication for material-independent but highly efficient topographic immunomodulation. Adv. Mater. 33, 2101228 (2021).
Google Scholar
Ouyang, L., Armstrong, J. P. K., Salmeron-Sanchez, M. & Stevens, M. M. Assembling living building blocks to engineer complex tissues. Adv. Funct. Mater. 30, 1909009 (2020).
Google Scholar
He, C. et al. 3D printing for tissue/organ regeneration in China. Bio-Des. Manuf. 8, 169–242 (2025).
Google Scholar
Ouyang, L. Pushing the rheological and mechanical boundaries of extrusion-based 3D bioprinting. Trends Biotechnol. 40, 891–902 (2022).
Google Scholar
Duraivel, S. et al. A silicone-based support material eliminates interfacial instabilities in 3D silicone printing. Science 379, 1248–1252 (2023).
Google Scholar
Hinton, T. J. et al. Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels. Sci. Adv. 1, e1500758 (2015).
Google Scholar
Xie, R. et al. Composable microfluidic spinning platforms for facile production of biomimetic perfusable hydrogel microtubes. Nat. Protoc. 16, 937–964 (2021).
Google Scholar
Stankey, P. P. Embedding biomimetic vascular networks via coaxial sacrificial writing into functional tissue. Adv. Mater. 36, 2401528 (2024).
Google Scholar
Kang, D. et al. Bioprinting of multiscaled hepatic lobules within a highly vascularized construct. Small 16, 1905505 (2020).
Google Scholar
Larson, N. M. et al. Rotational multimaterial printing of filaments with subvoxel control. Nature 613, 682–688 (2023).
Google Scholar
Trujillo-de Santiago, G. & Alvarez, M. M. Together but not scrambled: a perspective on chaotic printing/bioprinting. Aggregate 5, e548 (2024).
Google Scholar
Zhu, S. et al. Bioinspired structural hydrogels with highly ordered hierarchical orientations by flow-induced alignment of nanofibrils. Nat. Commun. 15, 118 (2024).
Google Scholar
Huang, W. et al. Nanoengineered extrusion-aligned tract bioprinting enables functional repair of spinal cord injuries. Cell Stem Cell 33, 340–354.e7 (2026).
Google Scholar
Shao, L. et al. Omnidirectional anisotropic embedded 3D bioprinting. Mater. Today Bio 27, 101160 (2024).
Google Scholar
Choi, S. et al. Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles. Nat. Mater. 22, 1039–1046 (2023).
Google Scholar
Prendergast, M. E., Heo, S.-J., Mauck, R. L. & Burdick, J. A. Suspension bath bioprinting and maturation of anisotropic meniscal constructs. Biofabrication 15, 035003 (2023).
Google Scholar
Compton, B. G. & Lewis, J. A. 3D-printing of lightweight cellular composites. Adv. Mater. 26, 5930–5935 (2014).
Google Scholar
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L. & Lewis, J. A. Biomimetic 4D printing. Nat. Mater. 15, 413–418 (2016).
Google Scholar
Ouyang, L. et al. Expanding and optimizing 3D bioprinting capabilities using complementary network bioinks. Sci. Adv. 6, eabc5529 (2020).
Google Scholar
Spencer, A. R. et al. Electroconductive gelatin methacryloyl-PEDOT:PSS composite hydrogels: design, synthesis, and properties. ACS Biomater. Sci. Eng. 4, 1558–1567 (2018).
Google Scholar
Liu, H. et al. Filamented light (fLight) biofabrication of highly aligned tissue-engineered constructs. Adv. Mater. 34, 2204301 (2022).
Google Scholar
Hua, M. et al. Strong tough hydrogels via the synergy of freeze-casting and salting out. Nature 590, 594–599 (2021).
Google Scholar
Sun, F. et al. Soft fiber electronics based on semiconducting polymer. Chem. Rev. 123, 4693–4763 (2023).
Google Scholar
Liu, X. et al. Magnetic soft microfiberbots for robotic embolization. Sci. Robot. 9, eadh2479 (2024).
Google Scholar
Chen, G. et al. A review of hydrogel fiber: design, synthesis, applications, and futures. Chem. Rev. 125, 5991–6056 (2025).
Google Scholar
Kessel, B. et al. 3D bioprinting of macroporous materials based on entangled hydrogel microstrands. Adv. Sci. 7, 2001419 (2020).
Google Scholar
Sundaram, S. et al. Sacrificial capillary pumps to engineer multiscalar biological forms. Nature 636, 361–367 (2024).
Google Scholar
Guo, Y. et al. Microfiber-templated porogel bioinks enable tubular interfaces and microvascularization down to the building blocks for 3D bioprinting. Small 21, 2501594 (2025).
Google Scholar
Ouyang, L., Armstrong, J. P. K., Chen, Q., Lin, Y. & Stevens, M. M. Void-free 3D bioprinting for in situ endothelialization and microfluidic perfusion. Adv. Funct. Mater. 30, 1908349 (2020).
Google Scholar
Sunadome, K. et al. Directionality of developing skeletal muscles is set by mechanical forces. Nat. Commun. 14, 3060 (2023).
Google Scholar
Fan, T. et al. Engineering strategies for the construction of oriented and functional skeletal muscle tissues. Biofabrication 17, 022013 (2025).
Google Scholar
Ouyang, L. L., Wojciechowski, J. P., Tang, J. Q., Guo, Y. Z. & Stevens, M. M. Tunable microgel-templated porogel (MTP) bioink for 3D bioprinting applications. Adv. Healthc. Mater. 11, 2200027 (2022).
Google Scholar
Duan, F. et al. Biphasic modulation of insulin signaling enables highly efficient hematopoietic differentiation from human pluripotent stem cells. Stem Cell Res. Ther. 9, 205 (2018).
Google Scholar
Check back often for more exciting news!
